 MRRC - Cheetah / Kellison / 911 |
|
|
|
|
SlotForum News Section - Please read!
| |||
  |
 21 Dec 2011, 09:16
Post
#16
|
|
|
Alexis Gaitanis  
Group: PLUS+ Posts: 1,342 Joined: 4-August 05 From: Athens,Greece Member No.: 2,645  |
QUOTE (Screwneck @ 16 Dec 2011, 20:57)  The guide only sits 3mm in the slot, You can allways replace is with a Ninco sprung guide QUOTE (Screwneck @ 16 Dec 2011, 20:57) My chassis snapped after removing the rear axle and popping it back in again, It is true but if you enlarge just a bit the axle mounts with a round file before snapping back it will be ok QUOTE (Screwneck @ 16 Dec 2011, 20:57) Worst of all is that hardly anyone stocks any pinions and axlegears for the offset Sebring chassis You have 2 choices: 1-replace with Slot.it offset gears available at Pendles among others 2-use standard gears and run them in for 15 min after you have pasted with toothpaste then rinse with water. The only downside is that they dont work in reverse. |
 |
|
|
25 Dec 2011, 21:08
Post
#17
|
|
 Racer Dude
Group: PLUS+ Posts: 246 Joined: 7-February 10 From: Norway,southeast Member No.: 14,476 |
QUOTE (tomwysom @ 21 Dec 2011, 04:08) Any chance of some photos, or maybe tell us what it runs like? Cheers, Tom. Well it is like all sebring chassis. We only race non magnet. and cars from most manufactures must be tuned to work, Here is what i do with sebring cars 1 Change complete rear axel = mb slot axel and bushings Slot it offset gear, Nsr wheels and rubber. 2 brass tube glued in chassis for front axel 3 MB slot guide with NSR brushes. Sorry no camera. -------------------- I pity those who take authority as the truth, not the truth as authority.Benjamin Franklin
|
|
|
|
|
25 Dec 2011, 21:49
Post
#18
|
|
 Nobby Berkshire 
Group: Members Posts: 1,871 Joined: 6-January 04 Member No.: 469 |
The Sebring chassis has an FF slimline motor with a 1.5mm shaft. Which SlotIt pinion fits this narrow shaft?
|
|
|
|
|
25 Dec 2011, 22:03
Post
#19
|
|
|
Racer Dude
Group: PLUS+ Posts: 246 Joined: 7-February 10 From: Norway,southeast Member No.: 14,476 |
QUOTE (Screwneck @ 25 Dec 2011, 22:49) The Sebring chassis has an FF slimline motor with a 1.5mm shaft. Which SlotIt pinion fits this narrow shaft? Mrrc has some in brass now. before that i bougth pinion from pendle, scaleauto i think. -------------------- I pity those who take authority as the truth, not the truth as authority.Benjamin Franklin
|
|
|
|
|
4 Mar 2012, 23:38
Post
#20
|
|
 Racer Dude Group: Members Posts: 222 Joined: 17-March 07 From: Maryland, USA Member No.: 6,655 |
It's like busterfla said, a Kellison is NOT a Cheetah. Kellisons were not built by Bill Thomas, and were intended for the drag strip, not road racing. Maggiacomo even built a topless version of one in 1959 or 1960. Let's not get confused here.
-------------------- Late apex works ... most of the time.
Bleny - the roustabout at Belgate Raceway http://belgate.tripod.com/raceway |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
  |
Lo-Fi Version | Time is now: 20th May 2013 - 04:56 |
Powered By IP.Board
© 2013 IPS, Inc.
Licensed to: SlotForum. All text, photos & graphics © 2003-2012 SlotForum or the member posting the content (unless indicated) - All rights reserved.
© SlotForum Copyright Notice - Please Read / © Aviso de copyright SlotForum - Léanlo, por favor / © A proposito del Copyright del contenuto di Slotforum - Per favore leggere attentamente