SlotForum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-10 of 10 Results
  1. Andi Rowland Designs
    Brabham BT46 Policar gearbox conversion for Scalextric models How to: So as ever you will need a donor car. Scalextric helpfully gave me a pre-production prototype so some of my photos show that. In order to check final fit I also converted my liveried car once it had arrived. Please note...
  2. Andi Rowland Designs
    Hesketh 304 Policar gearbox conversion for Fly model How to: So, as ever you will need a donor car. There are several models available, I am doing the Alan Jones car. This conversion is non-reversible for the Fly donor body. 1. Disassembly: Disassemble the Fly car by removing all screws. Set...
  3. Andi Rowland Designs
    Tyrrell P34 Policar gearbox conversion for Scalextric 1976 model How to: So as ever you will need a donor car. Currently I think Scalextric have only released the car as a twin set so you have a choice of either car or both! This conversion is reversible for the Scalextric P34. 1...
  4. Andi Rowland Designs
    Tyrrell P34 build how-to A. Parts required for this build: 1. Complete kit from Pendle Slot Racing: This comes with all wheels, tyres, chassis, body parts and drivetrain. If for any reason you wish to use other rear tyres and wheels for your build I would advise speaking directly with Pendles...
  5. Andi Rowland Designs
    This conversion is one of the simpler ones. SRC have made a nice model so rather than replace all the rear end detail I have opted to keep it. This does mean that the large cylinder covering the original crowngear remains present but overall I think this is a reasonable compromise. You will...
  6. Andi Rowland Designs
    This is a how-to for converting a Scalextric Brabham BT26 into a Policar racer. The Scalextric model I have has a few minor defects that the other Scalextric cars don't have. I'm not sure if this was a batch problem or is a defect of the whole model design. I found that the back of the body is...
  7. Andi Rowland Designs
    This is a how-to for converting a Scalextric Mclaren M7C into a Policar racer. I have chosen to convert the Yellow Surtees car: But these other liveries are all convertible: This makes a really nice, smooth and quick handling car. So this is how I did it and should form a clear guide...
  8. 1:32 scale Cars
    I've been working on converting a few of the Scaley 1960's open wheel cars. I foolishly ignored these cars when they were first released on the basis that my focus is 1970's. Then recently I was scheduling some cars and noted that some of these cars actually ran in 1970 or even 1971. So I did...
  9. Andi Rowland Designs
    So recently I've been buying some Scalextric cars. Not done that for a while..... I bought the lovely Surtees McLaren M7C. Took it apart (yes tricky). I gave it a nice Slot.it drivetrain, Policar rear wheels and tyres and off I went or so I thought. Exiting at some speed from the first...
1-10 of 10 Results
Top