SlotForum banner

oxigen

  1. Slot.it oXigen
    Hi again, everybody; I have a question, in my last purchase of C chips, for my oxygen system, (SI-0201C1), when I have registered the car in the application, it has been registered as Car IC B2, on the other hand the rest of the cars come out as Car IC C. Do you think they were wrong at the...
  2. Slot Racing & Tuning
    Forgive me Father for I have sinned, its been more than 6 months since my last slotcar confession Sure I have posted on the forum, commented on other people's project, even got involved with the design of what could become a pretty little Digital Track and...a pretty big one. But with no racing...
  3. Slot.it oXigen
    Hi I am new to Oxigen and have recently converted my Ninco track to O2. Everything works except for this one issue. if you de-slot after crossing the finish line the system registers a time that is about 0.5-1s faster than a usual lap. I am using the Ninco power base arc pro controllers and C1...
  4. Slot.it oXigen
    I have been pondering to change the drivers in the my Carrera LCs to oXigen. Someone offered me 20+ oXigen drivers at a good price so I made the deal but I have had no time to do the install. Today I got it started. I have not seen other pics of similar installs so I thought of doing a small...
  5. Slot.it oXigen
    Hi all, I recently returned to the hobby and got bitten by the digital bug. I've finally gotten the oXigen Dongle driver installed properly, but am having a devil of a time getting the RMS Chrono installed. I keep getting this error (also attached) .\ConfigInfo.cpp(2502): InstallerError 10007...
  6. Auckland Digital Slot Racing
    This week we have moved out of lockdown #2. We are still at an alert level but we can meet and race. Tonight we are going to have our first digital night for a while. Before lockdown #2, we got to race regularly for a while using RCSO2 and oXigen. The combo has been very successful. So far I...
  7. Slot.it oXigen
    I think it is time to start a new thread about the SCP3 to discuss our stories and experience with this excellent new generation of slot.it controllers. I got mine today. Installed the app on my Android device without any issue (sorry for you all sucker with an iOS device - it sucks I know ;-))...
  8. ARC One/Air
    Hi all I have recently bought a Slot.IT SCP3 Controller for use with my ARC Air Power Base (PB), but I would like to run the SCP3 using native Oxgien firmware and not ARC Air/Pro Firmware for added features such as braking I have read that it is possible to upgrade the ARC Air/Pro PB Firmware...
  9. Slot.it oXigen
    Dear all, Does anybody know when the app for the activation and confguration of the new Slot.it SCP-3 controller will be available for IOS?
  10. Whats New News
    Our RCS Team made to the news with the release of the new RCSO2, their RMS to augment oXigen racing with several simulation feature: https://www.slotcarspassion.com/rcs02-logiciel-gestion-oxigen-slot-it/ This is an important milestone for the team of course, but also for slot.it and the digital...
  11. Slot.it oXigen
    Finally, the (looooong) wait is over! We are proud to announce the release of RCS O2, the first RMS for a digital slot race system with extended simulation features. We thank all that helped us in the background and of course Slot IT. We feel we got the most out of the current firmware and...
  12. Events
    Double Digital racing in the Low Lands Dear Slotrace Friends When the wind starts blowing trough the trees and the leaves are falling, when we've dumped our shorts & slippers for scarfs and raincoats... ...then the time has come to start the preparations for the Suzuka Double Digital. For the...
  13. Events
    Hello everyone, it's time to announce the 9th edition DiSCA Le Mans 24 hours! The dates for the race will be 4th-5th April 2020. As usual the circuit will be open for free practice and night time qualifying on the preceding Friday. The venue address is provided in the sporting regulations...
  14. Slot.it oXigen
    Hi folks, a few weeks ago we started organizing digital test days at SRC eindhoven with the Slot it Oxigen system. For this I used the Oxigen dongle from the club itself. After some research, I was able to install the drivers on the computer with windows 10. Everything worked as it should. To...
  15. Events
    Igualada Digital - DiSCA European Championship Finalé, 2nd-3rd November For the first time, DiSCA travels to Spain to close out the 2019 digital racing season. We will share the fabulous Cric Crac Superdome with the Spanish Digital Championship Finals (CSD) which take place on Friday and...
  16. Events
    Long time coming announcement... about six months :) This year DiSCA is running the first multi-round, multi-national digital slot racing championship on oxigen. The championship runs simultaneously for GT3 Euroseries events and WEC 6h events, on double-header weekends where drivers have the...
  17. Slot.it oXigen
    Hey there, Here is a quick run down of what I am trying to achieve. I am running oXigen on a Scalextric 4 lane track. I power the track directly with 15 volts. Everything runs very smooth. It is a fast track with only R3 and R4 curves. To increase the fun I wanted to add 4 Fly Semi trucks as...
  18. Slot.it oXigen
    Hi all I have altogether bought 2 Slot it SCP2 controller from an authorized Slot it retailer in Singapore 3 weeks ago but unfortunately one of it cannot be able to activate the build in Ghost/ Pace car mode available on the SCP2 controller so would like to seek help here if anyone using SCP2...
  19. Events
    Hello everyone, It is time to announce the registration process for the 8th edition of the DiSCA Le Mans 24 hours. The dates for the race will be 6th-7th April 2019. As usual the circuit will be open for free practice and night time qualifying on the preceding Friday. The venue address is...
  20. Slot.it oXigen
    A much awaited bugfix release for oXigen 3.x series has been released. It clears up a serious bug (actually, two) which caused erratic car behaviour, as experienced by many customers. For now, the fix is for Controller (upgrade to firmware 3.02), and chip type B1 (upgrade to firmware 3.02)...
Top