Search Results for ‘scaleauto’

Entries are invited to the 9th* running of this 6hr Enduro Race for GT3 models to be held on Sunday January 22nd (* with due acknowledgment to South Manchester SCC for running this event post Covid in 2021 and ‘22). Models to be raced; 1/32nd Scale NSR, Scaleauto, Racer Sideways and Slot.it GT3...

I knew that Scaleauto was working on it but I was not sure if they were going to do the real thing. And apparently they are. This is the final prototype 3d printed. I am not sure why they are not using their new grey material for the chassis. Anyway, this is coming and I am will...

BRAND NEW MSC Competition Subaru WRC'98 #3 Montecarlo with front light additional set - Montecarlo Chasis Unused condition, never been off the casing. Box has little storage wear but otherwise its in pristine condition. Very hard to find, therefore very hard to price. Open to offers.

As the Italian offerings were not enough, Scaleauto joins the bandwagon with two nice generic bodies: https://www.slotcarspassion.com/scaleauto-f1-generic-1-32/ I would say that they look good and with the same motor/tyre.gear they could be a nice match for the NSR model.

Scaleauto is branching out into LMP cars. Two models announced one year ago are now coming to production but we do not yet when they will be available. Great choices of models. On their FB page they have announced some releases (the new Audi R8) and some upgrade kits with racing components...

National GT3 Championship 2021 The championship clubs have voted to keep the series rules as they were set in 2020, although we have introduced a newcomer and an old codger trophy. Depending on government guidelines Wolverhampton and South Manchester rounds could be rearranged. The Pendle...

the last race of 2019. Most championship places are already sorted. But, we still had a good turnout of 14. Open Top GT is a great class. the cars are closely competitive, handling is very predictable and the cars are quick. Some quick times, close racing and frustration abound. The results...

Things are hotting up in this class. The last two rounds have seen a dramatic increase in speed with many drivers now going below 8.70 seconds with Nic dropping into the 8.3 bracket. Most drivers are opting for the Scaleauto Radical, powered by Sprinter2 motors and running the soft chassis...

Usual mix of cars tonight though the Scaleauto Radical with a soft chassis and Sprinter 2 motor is still the car to beat. The resulsts are in: Pos. Driver Lap Total Time 1st Nick Senior 8.65 11:12 2nd Nicholas 8.66 11:23 3rd Russell T...

Molesey SCC NSR/Scaleauto GT3 Event - 8th December 2019 Entries are invited for the annual GT3 event at Molesey SCC on 8th December 2019. The day will also incorporate the Brian George memorial trophy. As we did last year, we will be following the national GT3 series rulebook, although...

Entries invited for round 3 of this years National GT3 Series on Sunday June 9th. Club Address: Unit 1 Wansell Road, Corby, Northants, NN17 5LX. Format: Open at 08.00 10.00 Full 3 lap qualifying to decide heat groups 4 minute heats followed by single step up ladder finals. Please put your...

Entries are invited for the 2019 Molesey double six hour endurance weekend! The format & rules will be much the same as the very successful event we held this year, with Sideways group 5 models running on Saturday 22nd of June and Scaleauto GT models on Sunday 23rd June. The event is open to...

After today's announcement of a brand new plastic track system from ScaleAuto I thought I'd put together a track libraray for Ultimate Racer. The range of corners that are planned will make the track a class leader, with six, yes six different radii. The width of the track is 20cm, just a...

Excellent news for GT3 fans and DiSCA racers. Scaleauto has released 3D plans for the new version of the Audi R8: http://www.slotcar-today.com/en/notices/2017/08/preview-audi-r8-lms-gt3-scaleauto-6627.php The model will be released in 1:32 and 1:24. If they are going to use the latest tech in...

Hi everyone, I have a question regarding the motors from scaleauto. I was wondering if someone bothered to try them in terms of: 1) RPM 2) Torque 3) Magnetic field 4) Overall perfomance/feeling A) Baby Sprinter: 18,000 rpm (SC-0027B) B) Sprinter-1: 18,000 rpm (SC-0028) C) Sprinter...

Wolverhampton slot car club is pleased to offer you the chance to race 1:32 GT3 car models, that means ANY plastic or 3D printed (chassis and/or body) GT3 slot car on our International track. Event to be held 19th November 2017 Entries are now being accepted. Venue:- Wolverhampton Slot Car...

We are pleased to offer the opportunity to race your 2013 onwards Carrera or SCX DTM models on our popular International Track this will take place Sunday 15th October 2017 Entries Now being accepted. Wolverhampton slot Car Club Claregate Youth Centre, Aldersley Leisure Village, Tettenhall...

I posted this on another site and felt more folks could benefit from this I was encountering dead spots on my 80 foot Scalextric classic track and I was doing the screw driver twist in the joints etc. but that was not the solution. I had driven on the track for weeks with no problem. What I did...

Basically I bought a Fly variable controller from Getslotted a while ago, probably over 6 months - anyway it seemed to work fine. But tonight whilst testing a few different cars on my home circuit (a slot.it porsche, a fly porsche and a scaley merc dtm) I noticed whatever knob/control I turned...