SlotForum banner
1 - 2 of 2 Posts

· Premium Member
Joined
·
184 Posts
Discussion Starter · #1 ·
This week its 1/32 BSCRA Saloon.

You are welcome to use either a Saloon or Sports shell.

If you do not process a 1/32 G12 BSCRA Saloon car you are more then welcome to use a falcon/Hawk powered car.

14591610_1243272762390575_63556341275842


See you all soon Sandy x
 

· Premium Member
Joined
·
184 Posts
Discussion Starter · #2 ·
16681476_10156733503276515_5694497066628


16681748_10156733503291515_3143660746156


16683891_10156733503326515_1181144395024


Race report :-

With Josh and Terry returning after illness there were 10 of us to race (up to) GP12.Dave decided not to race after the gear grub screw striped before he had time to qualify so in the "C" final was Simon, Ian and Sue,at the end of the 2nd segment it was Simon from Ian from Sue who seemed to be having a quiet night, in the 3rd segment Ian retired with a mechanical problem so it finished with just 2 drivers , Simon 1st and Sue second. In the "B" final was Sandy, Greg and and Josh, Sandy hit the front and stayed there Greg seemed to be struggling with tyres that were a little to big and Josh was another one having a quiet night after his success a couple of weeks ago. But that was the finishing order. In the "A" final was Steve, Brian and Terry, Steve went into the lead followed very closely by Brian and Terry, but Brian was having too many offs and after the 1st segment it was Steve 1 lap up on Terry who was 1 lap up on Brian, in the second segment Brian managed to get 1 lap up on Terry as steve stayed in the lead. It ended with Steve 1st, Brian 2nd and Terry 3rd. Driver of the night must go to Steve for his win but Terry had his best night ever at the club and the second fastest time so deserves a mention. The top 3 were Steve, Sandy and Brian.

Thanks as always to Brian for the race report and Ian for the pics.

Sandy xx
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top