SlotForum banner
1 - 1 of 37 Posts

· ParrotGod
12,922 Posts
1) yes, it is possible. SSD protocol will help but you have to make sure that the loops are only connected to the main track from one side.
2) I do not see why not...but if you are new to routing I would take one step at the time. Doing what you plan there requires cutting flippers and merging the slots...which can be fiddly.
3) I think you can do it with ARC pro as your S/F line. You would need to embed the track piece of the power base to the routed track
4) Not sure. I think some people here with more routing experience can help.
1 - 1 of 37 Posts