[Schackel]

I would like to swap seven ROKAR M- chassis, unused, to Lifelike Fast Trackers T or single Fast trackers T can motors.

Since I´m not permitted to publish this in the swap shop, I´m doing it here.

Perhaps anybody can help...

Roland

 

[neorules]

Are you talking fast tracker m-car rolling chassis or just chassis-- you want either rolling chassis t chassis or just the can motor? I have lots of t-chassis stuff. What project do you have going? Also, are your rokar chassis the ones with the plastic encased bushing or the bare brass only ones?

 

[Schackel]

QUOTE (neorules @ 25 Mar 2012, 17:45) <{POST_SNAPBACK}>Are you talking fast tracker m-car rolling chassis or just chassis-- you want either rolling chassis t chassis or just the can motor? I have lots of t-chassis stuff. What project do you have going? Also, are your rokar chassis the ones with the plastic encased bushing or the bare brass only ones?

I have rolling chassis. The bushings are brass and encased in extra plastic parts that can be clicked in or out.

I need the LifeLike Fast Tracker can motors only, not the chassis.

 

[neorules]

Do you need working motors? Arms and cans? Thrown wire arms? From your last post it seemed you needed certain things.

 

[Schackel]

QUOTE (neorules @ 26 Mar 2012, 03:59) <{POST_SNAPBACK}>Do you need working motors? Arms and cans? Thrown wire arms? From your last post it seemed you needed certain things.

"I need the LifeLike Fast Tracker can motors only, not the chassis."
To me this is a clear statement that doesn´t say anything about "certain".
And normally nobody wants to swap factory new parts to worn out or broken things.

BUT I could also offer single arms, axles, mags, thrown wire arms etc. etc., i.e. a pile of parts for scratchbuilding.

But how about you ? Why do you ask so much instead of offering anything - if you have something ?

Roland

 

[DJ]

 

[neorules]

Schackel-- since you had another thread that you were looking for "does anybody here know whether or where one could get Lifelike Fast Track Chassis or motors ? They may be used or destroyed as long as com and mags are not damaged.
I need quite a pile..." I was just trying to help you out-- I have quite a few of a lot of the things you are seeking. When someone asked about your project, you seemed to go silent. You can buy all the new motors you want from Lucky Bob's for the T. I aassumed you wanted certain parts but not others.

 

[Schackel]

QUOTE (neorules @ 27 Mar 2012, 01:47) <{POST_SNAPBACK}>Schackel-- since you had another thread that you were looking for "does anybody here know whether or where one could get Lifelike Fast Track Chassis or motors ? They may be used or destroyed as long as com and mags are not damaged.
I need quite a pile..." I was just trying to help you out-- I have quite a few of a lot of the things you are seeking. When someone asked about your project, you seemed to go silent. You can buy all the new motors you want from Lucky Bob's for the T. I aassumed you wanted certain parts but not others.

Well, you are right, but as far as I remember in this other thread there was no talk of swapping.
And nevertheless - you asked questions about what I have but did not say a single word about what you might have to offer, did you ?

So my silence regarding the project in the other thread does not seem to be more silent than yours in this one here. Quid pro quo...
And mine had nothing at all to do with the subject of the thread. I´m not used to telling the shop assistant what I´m going to do with the item I want to buy.

As to my project - it is not my cup of tea to talk about things before they are started.

But thank you very much for Lucky Bob´s address once more - I simply had overlooked it.
I will buy the motors I need there and sell the Rokar chassis separately. Maybe this is even more effiecient. And if not - well, I will survive.

Best regards and thank you once more,

Roland

 

[montoya1]

 

[Schackel]

QUOTE (montoya1 @ 27 Mar 2012, 17:53) <{POST_SNAPBACK}>

Surely facial expression and gestures would defuse my words. It´s the fate of non-native writing. The refinements of the language are not available for me.

So sorry if it sounds harsh ( ? ). It´s by no means offense meant.

Roland

 

[FZSsemans®]

is this an attempt to be friendly? maybe in the black forrest it is, but the rest of the world might consider it a bit........rude

(nb, I'm not a native english speaker)

 

[DJ]

I think the "friendly" part may have been lost in translation..?

 

[FZSsemans®]

dont tell me.........I'm not the shopkeeper, I just fill the glasses. and I Never ask what you're gonna do with them.

 

[Schackel]

QUOTE (DJ @ 27 Mar 2012, 18:35) <{POST_SNAPBACK}>I think the "friendly" part may have been lost in translation..?

QUOTE is this an attempt to be friendly? maybe in the black forrest it is, but the rest of the world might consider it a bit........rude

(nb, I'm not a native english speaker)

Thou shalt have no other opinion before me.

What an idyllic world.

BTW - I hope you´re able to find the Black Forrest on the map.

NZL the rest of the world - might be really correct.

It might have been more useful to have told me why I should explain WHAT´s and WHY´s to anybody who didn´t do even the tiniest thing in the same regard but only wanted to squeeze some info out of me.
If THAT ist the swap policy in your rest of the world - poor rest.

My first question was simple and polite. So if someone was interested in trading, the simplest thing would have been to tell me "I have some things for swapping, let´s do the rest via PN" or whatsoever.
Wise as you obviously are you surely will be able to explain to me what the question about any project had to do with my request.

Imagine somebody wants a FLY CAPRI in the swap shop. Does he first have to tell what his project is ?

Strange kind of logics in the rest of the world.

Now dig out your club and - STRIKE ! Obviously you two need somewhat like a victim - here you are ! Congratulations !

And now - whatever !

Kindest regards,

Roland

 

[FZSsemans®]

dont think anyone was offending before you did. its just the arrogance you just displayed in the last post that doesnt make me even wanne condsider helping you out . of course I know the whereabout of the black forrest, but if I didnt would it make you a better person? nooooooooooooo. But you just wanted something, someone else was thinking "with you" from a different angle..........but thats something you might have missed in your narrow perspective. so live long and prosper......with all that beer you gathered around you. nb, do you really consider yourself a victim on this matter? there's really something in the water in Lake Constantin or would you prefer Bodensee?

 

[FZSsemans®]

QUOTE (Schackel @ 27 Mar 2012, 20:50) <{POST_SNAPBACK}>Strange kind of logics in the rest of the world.

thats called interest, making conversation. thats what people connect.

 

[montoya1]

Neorules is a stand up dude who I know was asking about your project so he could give you a more informed answer.

if you cannot see that then so be it.

 

[neorules]

Things got a little misunderstood I think. I had seen the previous post(thread) and since I have a load of cans and arms for the t chassis in various states of new , used and broken I was thinking if the project did not require a new working order can I would just send some of the parts I had laying around if they were of use on your project Schackel. No trade and no charge. If its another top secret project that requires some other forms of parts maybe new would be better. Let me know if I can be of aid in the future.

Thanks for the support Deane and others.