SlotForum banner
1 - 2 of 2 Posts

·
Premium Member
Joined
·
2,574 Posts
QUOTE (bswan72 @ 24 Aug 2009, 15:13) <{POST_SNAPBACK}>Try putting one drop of oil on the bottom of the chassis where the motor armature shaft is inserted into the chassis. Be sure not to use too much oil to prevent the motor brushes from getting oil soaked.

Also, apply one drop of oil on the other side of the motor armature underneath the gear where the shaft goes thru the top plate.

Best regards,
Brian

This usually works for me.


regards

Tony
 

·
Premium Member
Joined
·
2,574 Posts
QUOTE (bswan72 @ 24 Aug 2009, 15:13) <{POST_SNAPBACK}>Try putting one drop of oil on the bottom of the chassis where the motor armature shaft is inserted into the chassis. Be sure not to use too much oil to prevent the motor brushes from getting oil soaked.

Also, apply one drop of oil on the other side of the motor armature underneath the gear where the shaft goes thru the top plate.

Best regards,
Brian

This usually works for me.


regards

Tony
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top