SlotForum banner
Status
Not open for further replies.
1 - 20 of 31 Posts

·
Slot-A-Holic
Joined
·
5,504 Posts
Discussion Starter · #1 ·






Wheels: Riggen 6 hole threaded.
Motor: Mura early "Green Can" with gp12 vintage arm.
Guide: Jet Flag
Body: O2R
Paint: Jairus
Weight: 98g
 

·
Slot-A-Holic
Joined
·
5,504 Posts
Discussion Starter · #3 ·






Chassis: Dennis Samson,
Motor: John Havlicek 38 turns of 27
R wheels: setscrew 1/8 axle w/JK rubber
F wheels:ball bearing (dont know the brand tho)
Motor bracket: REHCO w/ ball bearings
Body: # 5 Choti by Ray Fellows
Paint: Oscar Morales
Weight 125g
 

·
Slot-A-Holic
Joined
·
5,504 Posts
Discussion Starter · #4 ·






Entry: FRENCH
Planning: Maximo a.k.a. David Siller
Chassis: Jairus Spec Choti Liteweight Model
Motor: FRENCH 28/29 Armature - Electric Dreams / Painstakingly built by John Havlicek
Body: Choti Ultra #5 From Electric Dreams / Painted by Jairus
Front Wheels: Vintage
Rear Wheels: Russkit repros Arodyn - Electric Dreams
Tires: JK Natural Rubber
Guide: Jetguide
 

·
Slot-A-Holic
Joined
·
5,504 Posts
Discussion Starter · #5 ·






Enter = Noda # 66
motor by = John Havlicek- 40/27- Mura Pink can- thanks John
R. Wheels = period with natural rubber, mounted by Jairus for me- thanks
F. Wheels = H.O. O-ring period style
Body by = Noda repop of a Choti design, #15 "Wild One"
Paint by = RDW's Imagineer
Chassis- period styling
Motor mount = not sure ?? JH motor fit in it so I used it.
 

·
Slot-A-Holic
Joined
·
5,504 Posts






Entry: Red Devil #77
Planning: Jaak Beentjes
Chassis: Jaak Beentjes
Paint: Jaak Beentjes
Motor: Vintage Mura C Can, Ball bearings both sides and a 50t/29G, Group12 arm, built by Andrew Brown Searle-AB Slotsport
Body: Choti #15 version #1 made by Raymond Fellows-One27Ray (Vintage style)
Front axle: Piano wire--Front Wheels: Vintage
Rear Axle: Threaded 1/8----Rear Wheels: Vintage----Rear knock offs: Professor motor (Vintage style)----Rear Tires: Sponge Natural Rubber
Guide: Dynamic with vintage braid----Guide collar: Du Bro(Vintage)
Gear: 7T Pinion 29T Crown
Bracket: Rehco (Thanks to Jairus Watson) (Vintage)
Bearings: Ball bearings rear (Thanks to Ralph R Klose FLY-TO-SKY)
Bearing holders: Buzco (Vintage)
Weight: 109 grams
 

·
Slot-A-Holic
Joined
·
5,504 Posts






MRSSS:
Chassis: regular floppy (front axles have been made immovable by soldering on braces)
Clearance - front - pretty good
Clearance - rear - lots!
Tires - front - beats me
Tires - rear - (see fronts)
Body - some sort of Choti with a hot dang Jairus paint job
Guide - Jet Flag (set for an itsy bitsy amount of braid recess, but with extra washers so it can be adjusted for a deeper recess)
Motor - Mura "Green" can
Arm - Team Czech 27 sgl
Magnets - Some sort of old ones that fit the arm and setup pretty well
Gear - Cox (lord help me) 7:29. This may have to change as the tip of my old lucky Ferret allen wrench broke off in the set screw! Then again, I might just leave it as is.
 

·
Slot-A-Holic
Joined
·
5,504 Posts
Discussion Starter · #8 ·






Info on Cheese Whiz:

Wheels/ tires: unknown Ebay stuff, maybe Riggen, still working on final rubber.
Motor: Mura Green can, minor mods, old Camen Group 20 arm
Chassis: Don't know why it came out like it did
Body: Ray
Paint: Rattle can
 

·
Slot-A-Holic
Joined
·
5,504 Posts
Discussion Starter · #9 ·






MantaRay #8
Chassis by Me, Duffy Bushing Holder, Decided against Ball Bearings
Motor by Champion 507 (Doug Azary)
Mura C Can and Endbell
Arm 38/27
Full Ball Bearings
Vintage style Fronts
Parma Dyed Crown
7T Steel Pinion
Jet Flag
Vintage rimmed wheels, Not Trimmed yet
RayNoda Body
92 g with bullet proofing
 

·
Slot-A-Holic
Joined
·
5,504 Posts
Discussion Starter · #10 ·






Ghost Pepper #72
Chassis by MantaRay, Oilites
Motor by John Austin
Mura C Can and Endbell
Grp 20
Full Ball Bearings
Vintage style Fronts
Parma Dyed Crown
7T Steel Pinion
Jet Flag
Vintage rimmed wheels, Not Trimmed yet
RayNoda Body
92 g with Bullet Proofing
 

·
Slot-A-Holic
Joined
·
5,504 Posts
Discussion Starter · #11 ·






Entry for; Dave Bradshaw
Car : Oat Willie sez "Onward Through The Fog"
Motor: Champion 525, I hear the thumbprint makes them faster ?
Chassis: Bits suppied by local hardware and endless box-"O"-bits in basement
that was a few bit's short of Cobled by me Dave Bradshaw, No jig used.
Gears: Cox 29/7 (just know they need to be taller, 26 was too much of a reach.)
Tires: natural rubber rear, HO O-ring fronts.
Guide: Jet with Cox braid poss.
Body: Choti # 15 by Raynoda
Paint & Grafix: Rattle can and the good folks at Designer Grafics Webster City,Iowa
Without the help of Ms.D , nothing would be straight for my humble entry.
 

·
Slot-A-Holic
Joined
·
5,504 Posts
Discussion Starter · #12 ·






Entry - 'Studebaker' #69.
Body - Guess who!!
Crapy Paint - Me
Front Wheels / Tires - Unknown vintage? from ebay junker / O ring
Rear Wheels - Russkit repops, Arodyn, ED.
Rear Tires - Parma Tuna #70729
Guide - Jet Flag
Motor - Mura with unknown arm from old store stock, ball bearings, rebuilt by me.
Chassis - Me
Pinion - Sonic 7t steel
Crown - ParmaRit
Bracket - Rehco (I think)
Ball Bearings - Yep
Clearance - Front, I think so. Rear, definitely
Weight - 113g
 

·
Slot-A-Holic
Joined
·
5,504 Posts
Discussion Starter · #13 ·






Body = Choti #5 Ultra Negative Lift
Guide = Jet flag
Gears = JK steel pinion / Cox crown gear
Front wheels = O ring
Rear wheels = yes
Tires = Mid America Ruff Cuts
Paint & Graphics = kravico
Guide tongue = UGO fabricated by Warmack
Motor bracket = Bryan Warmack
Motor = Mura NCC20 (for now)
 

·
Slot-A-Holic
Joined
·
5,504 Posts
Discussion Starter · #14 ·






Mura C can with 30/26 arm
REHCO motor bracket
6t pinion courtesy of Bill Fernald
Dyed Parma crown gear
Associated rear hubs with treated natural rubber tires
Vintage Thingie fronts
Jet guide flag
Marklin lead wire
Ball bearings
Electric Dreams Choti #5
 

·
Slot-A-Holic
Joined
·
5,504 Posts
Discussion Starter · #15 ·






Mura motor bracket
Mura front guide holder
John Havlicek tinkled pink B-can motor
Stuebe/Associated rear wheels with Alpha natural rubber
Mura O-ring fronts
Parma Pink crown gear
ProSlot pink lead wire (Thanks Ron Vincek)
Cobra/Jet guide flag
Custom brass nose weight
John Dilworth Choti re-pop body
Paint by McPherson
 

·
Slot-A-Holic
Joined
·
5,504 Posts






X-calibre by Chief32s
Wheels by Kai, Alpha Piranah rears, O-ring fronts.
Motor 16D by Havlicek, #27 wind, Mura B endbell, Parma EPX magnets, Gold Dust brushes (cant remember what make of can).
Jet Flag,
28t Pink Parma Crown (dyed). 7t brass pinion.
Rehco bracket fitted with ball race bearings.
Body by yours truly.
Paint by yours truly (from rattle can)
Weight...Still to be determined.
 

·
Slot-A-Holic
Joined
·
5,504 Posts
Discussion Starter · #17 ·






Entry - #99 The Love Machine
Motor - Czech Powered - 12 turns of #14 wire...I think.
Rear Wheels - Electric Dreams/Arodyn - Vintage Reproduction Russkit X - Wide
Rear Tires - 13/16" X 5/8" Natural Rubber
Front Wheels - I dunno...they came from an old Champion frame from the 1960s.
Body - Electric Dreams Choti #5
Paint - Me...yes, I scratched it trying to mount the body while the paint was still wet. It will be covered by decals and hand lettering.
Chassis - Me...but I stole the wire and brass strip idea from TonyP's ThingyZillia.
Motor Bracket - Dubro
Gears - 7T brass pinion - 29T Parma Crown
 

·
Slot-A-Holic
Joined
·
5,504 Posts
Discussion Starter · #18 ·






Body "Slinger" repop by George Hawkins
Paint job by Jairus Watson, concept by Kaiser Edolf
Chassis by Jairus Watson
Motor Mura A can (ebay find)
29t Cox crown, 7t steel pinion
Rear wheels vintage all the way
Front wheels TeeneeTims by Kai, after a technical drawing by Rick Tighpen
Wires by Marklin
Guide Jet Flag
Weight 112 g
 

·
Slot-A-Holic
Joined
·
5,504 Posts
Discussion Starter · #20 ·






Hotter armature - in route - ETA est. 9/10
Guide and retention system - on hand
Improved lead wire management - in production - ETC 9/10
Gear to be slathered in Sharpie - TBD with final tooth count determination. Note: wife won't let me die.
Body - Better paint job - in production. ETA/TBD
Tires (rear) - Rims with lip and step cut (shown above) are having modern rubber mounted.ETA/TBD
 
1 - 20 of 31 Posts
Status
Not open for further replies.
Top