[RikoRocket]

Maybe I'm doing something wrong, but when I was plugged into port6 (for example) the car ID was 3, and plugged into port 3 the car ID was 2

The car ID has to be set for each car just once, and then it stays that ID. If you have a car ID 2 then you need to plug a throttle into the second port from the left to control it.

 

[RikoRocket]

What about real throttle profiles so you use it non-mag? Like we did with PB-Pro a dozen years ago...

DRC, have a look at this and see if you can do the same for ARC PRO...

https://www.slotforu...ttach_id=169267

 

[RikoRocket]

Strange, it was an upload to the attachments section. I'll try direct