[dutchdog]

Carrera NISSAN GT-R GT500 NISMO SUZUKA no 22 1000KM 1/32 / Motor: FC130
Carrera Audi R8 LMS team sportsline / Motor: FC130

I bought above 2 great cars, as I liked the livery, the nissan is stunning... These going to be my trackbusters so now these need modification.
I want the baddest engine I can dump in there and then ofcourse tyres and maybe rims need upgrading.
Please advise me.

SCX engine from spirit
Nasaka II engine
NSR shark engine

What tyres and rims?

Thanks

 

[dutchdog]

Did some googling and want to try this beast of an engine:

Avant Slot Mag Motor "blue" (FC-130) [21,892 RPM/12v] 27,000 RPM/14.8v
[405 gcm/12v] 500 gcm/14.8v, 22.2W/12v, 44 gr. mag. dnf.

http://www.topslotsntrains.com/topslotsntr...Avant%20Slot%27

Came accross a great engine link webpage: http://slot.staynuts.com/technic/tips/item/engines-overview

 

[Pete-slot]

MB SLOT - DODO motor - massive magnetic - banned at our club
replace the whole back end with NSR axle - gear - pinion - rims - tyres
Theres a lot of room with inline setups so , rims/tyres as wide as you can get, 12 i think is widest.
put a B-NOVA guide plate in and a slot it guide.
replace the front wheels/tyres with a lower profile
strip out the interior replace with a BETTA BODIES interior
very quick indeed

 

[dutchdog]

Thanks Pete!! Seems I have some fun stuff to do with those two carrera cars.

 

[dutchdog]

QUOTE (Pete-slot @ 27 Mar 2012, 09:26) <{POST_SNAPBACK}>1. MB SLOT - DODO motor - massive magnetic - banned at our club
2. replace the whole back end with NSR axle - gear - pinion - rims - tyres
3. rims/tyres as wide as you can get, 12 i think is widest.
4. B-NOVA guide plate
5. slot it guide
6. replace the front wheels/tyres with a lower profile
7. BETTA BODIES interior

Ok, bare stripped the two carrera cars. Took out interior, now I need some shopping.

One of the cars or maybe both will be scratchbuild chasis, at least that is the plan. I might upgrade one as above.

Can someone point me to an UK shop that has the goodies I need above.

 

[dutchdog]

1. MB slot dodo motor

Pendle slot car racing UK

2. Here for the NSR axle kit. (dang these are frikken expensive!), 41 pund/60US)

http://www.electricdreams.com/Shop/nsr-921...rs-p-11874.html

9201 Inline Kit contents - 9001 front hubs/trued 17x8 no grip tyres + 9007 rear hubs/trued UG tyres + 2x 4802 axles + 4803 bearings + 6327 27z In line crown gear Ltd Stock 40.95

9211 In Line Kit contents - 27z IL Gear, Large Diameter Front wheels with 19x10tyres, Large Diameter air system rear wheels with 20.5x11.5 tyres, NSR500 oilites, 2xNSR054 axle etc Ltd Stock 40.95

3. Comes with two. Trued glued.

4. Are these the B-nova guide plates?

http://www.electricdreams.com/Shop/bnova-g...f-3-p-8869.html

5. And then these slot.it screw guides

http://www.electricdreams.com/Shop/?main_p...e&submit=GO

 

[Pete-slot]

for b-nova write direct to the guy who makes them [email protected], tell him you want to convert Carrera guide to SLOT IT... they come in packs of 2 and cost $6 a pair plus postage.

for the NSR inline back end... and fronts ... buy an NSR car and strip it .. sell the chassis/body/motor parts etc on ebay ..
it will be cheaper .. the new AUDI R18 has the right parts for you.
NSR 1120-IL AUDI R18 TDI LMP CARBON TEST SEBRING 2012

Interior .. go direct to Betta Bodies...www.bettaandclassic.com... although Pendle may have a lightweight interior that suits.

think about a SLOT IT HRS chassis .... however if you do , you cant use all the NSR parts.. however you could use SLOT IT parts for everything .... once again buying a car is cheaper.
try first with the CARRERA chassis... you can stiffen it a little with carbon rod etc.
Ive done all this with a Carrera 917/30 and it works fine on wood track.

slot it , DODO motor and NSR parts .. PENDLE has everything

cheers
Peter

 

[dutchdog]

View Image SICH07 UNIVERSAL DEEP GUIDE FOR SLOT TRACKS SCREW FITTING In Stock 3.85
View Image SICH10 UNIVERSAL STANDARD DEPTH GUIDE WITH SCREW FITTING In Stock 3.45

Which guide would you advise Pete? The normal one or the deep one? (ninco track)

 

[Pete-slot]

SICH10 UNIVERSAL STANDARD DEPTH GUIDE WITH SCREW FITTING In Stock 3.45
the other one is too deep
cheers
Peter