SlotForum banner

Carrera Wheels

978 Views 3 Replies 3 Participants Last post by  JAK
I have Carreras Jag C type and Ferrari 166 chassis and want to use the C Type wheels on the 166 chassis.
The 166 axle has round brass bearings and the C Type square? black plastic so they are not immediately swappable. The 166 appears to have a slightly wider axle so I really just want to swap the Wheels.

I have removed one wheel from the front of the Jag but because the axle is grooved at the ends I think I have damaged/cracked the wheel hub.

Is there a special method required to remove Carrera wheels or have I just been unlucky with the first one.

and advice greatly appreciated.
See less See more
1 - 2 of 4 Posts
Thanks Swissracer for the help - so it just like the other makes but with more risk of damage.

The 166 is also by Carrera so hopefully any hole enlargement will not be so bad.
1 - 2 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.