SlotForum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1,889 Posts
Cartrix do a gear puller with thin jaws. Unlike the Ninco tool, the Cartrix is just a puller, but needs must, if you don't wish to try grinding the ninco down.

Mark.
 

·
Registered
Joined
·
1,889 Posts
QUOTE (compound_goose @ 16 Mar 2004, 20:09)use a pair of pliers put one side on the end of the motor shaft and one on the back of the pinion when u squeese it it will pull the pinion half off, it shold just come off from there, it did on all my scaley cars.

Sorry to disappoint compound G, but on a FLY sidewinder the pinion is very and I mean very close to the motor can, so one half of the jaws of a pair of pliers will not get in there - neither will the standard Ninco tool. Just ask my Lola T70 !


Aaron! welcome back. Thanks for the part number of the Cartrix tool (not that Sean needs it you understand, but helpful all the same
)

Mark.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top