SlotForum banner

Chassis advice for a German beast..!

1402 Views 8 Replies 6 Participants Last post by  gecko
I was wondering if anyone had any experience of the resin bodykits made by Ditech of Germany.

A quick pic just help jog some memories.

The reason I ask is cos on Sunday I purchased a rather fine Ditech resin kit of the BMW 320 Group 5 racer (from the MK swapmeet) - a real beast of a machine, and I thought what on earth type of chassis is gonna fit this machine?

A Slot-it HRS chassis would seem too small and there is no fixing posts on the inside of the body to mount the chassis to - I was wondering about a TSRF (is that right?) metal chassis, but I just don't know.

Help... please!

See less See more
1 - 1 of 9 Posts
Hi Mark...That is an impressive beast.

If you can let me have the dimensions of the body, I can probably let you know a suitable chassis for it.
It does look like a TSRF would fit but they are pretty expensive in the UK.

In what way is a chassis too small, I have a few mounted on cars that look to be larger than the car you have. As for mounting posts, if you use the you can always use their side mounting lugs which just are glued on, but posts are better and really very easy to make.

If you get stuck I can let you have some info and pictures on how to make them, or you can just take a look at the Scratchbuilding forum and see what others have done.


1 - 1 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.