SlotForum banner

chassis set up?

1765 Views 10 Replies 8 Participants Last post by  endbelldrive
Hi, I´m new to the forum, and I´d like to have some advice to set up a brass 1/28 chassis with a 16D type motor.
I live in Argentina and 1/28 is a common scale here (we race 1/24 and 1/32 too), perhaps you are not too familiar with 1/28 since I couldn´t find anything on the net about these...

What I´d like to know is about the front end of the car (guide, front axle, track clearance, etc), to make it tighter or looser. The track I´m going to race at is a fast one with generally wide turns.

If you are not familiar with 1/28, perhaps your experience from 1/24 might help too...

So, any help??

Thnx a lot!!!
See less See more
1 - 1 of 11 Posts
QUOTE I'm really intrigued as to how you folks ended up in 1/28 scale.
Simple answer to that,1/28 seems to be a real popular scale for Japanese model manufacturers,they made a huge number of sports/CanAm cars in this scale,also,a lot of the Japanese kits that state 1/32 on the box,are rather on the large side(VMG Syndrome)and are more in the 1/28 scale range.

LS is one of the major companies off the top of my head.Most of this range were motorised battery powererd kits.Usually with one piece bodies that made them ideal for slot cars.
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.