SlotForum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
460 Posts
Discussion Starter · #1 ·
Hi, I am arranging a race meet at our club with club's some of our member's have been to this year yourselve's, Pendle and Hawthorne Park on Jan 15 sunday, our open class rule's are 1/32 plastic/resin body's no open wheeler's with glass and lightweight/standard interior, chassis can be plastic/brass/metal ect, body/chassis do not have to match, motor's scaly thru to boxer/NSR ( our PSU 2.5AMP ) rubber tire's only ( rear's can be oiled front's coated ) wood/medium guide's ( no white guide's ) no mag weight if needed all part's free choice rear track width no more than 1mm outside body any controller's. phil.
 

·
Registered
Joined
·
460 Posts
Discussion Starter · #3 ·
No the more the merrier as long as robbo doesn't have more than his share of pizza. phil.
 

·
Registered
Joined
·
460 Posts
Discussion Starter · #4 ·
Hi, for those not been before there's a carpark at the rear of the mill then walk down the hill to the front of the mill next to the canal, go thru brown door lift in front of you 5th floor unless you want to use the stair's
door to the left if so , out of the lift turn left and follow corridor round second door on left is the sport track next on the right wood track raceing there.If people arrive about 10pm start at 11pm will see how many racer's we have then after some racing have a break for nosh ( should have pizza hot drink's if you want to bring something youself that's fine ) then resume afterward' see you in the New Year phil.
 

·
Registered
Joined
·
355 Posts
Hi Phil

Thanks for the info on how to get to you, even when we have found the building. Hope the lift's not out of order
I will ask at the club on Friday who will be attending and will let you know the numbers.

See you soon

John
 
1 - 7 of 7 Posts
Top