[Frank T]

Hi Guys,

time has come.
Tomorrow i take the ready milled wooden plates in my flat.

And the- "Let the games begin"
Today i got the background picture and i think this is the right one for my theme.- Fance in the 50ties-.
6m x0,4m for only 30€. Thats a good price i think.

The only things i have to do! cut them in the widht and the height and glue them on the board. And cover the electicity pylons.

And that is what i bought this morning for 8€, These are from the Siku classicline and the normal price is nearly 25€
thus I intend something special

 

[Frank T]

Hi Black3sr,

nearly, the tractor will drive on the plate and will perform its work!

When it´s ready i´ll make a little video

Today I have to model the heights only once begun with the underbody by bars and borders. Photos come later

I have also equivalent times a question at you. How do I get a difference in height of 15cm with a length of 40cm with 12 cm MDF?

Water or stomething like that?

I have no idea.

 

[Frank T]

Both are good ideas,

I´ll try it with the slots on the underside and a little bit of water, so that I receive a flowing transition.
That the water does attack the MDF is not badly, since that becomes a way occupied with "crushed stone"

I will report!!!!

 

[Frank T]

Morning erverybody,

yesterday i started with the underbody, specially with the different hight in front of the track.

right the road becomes the village and beside it comes directly a increased dirt road, surface with grass and sand

the crossing becomes an approach road to the palace, which I already presented to you in my pictures treath

Before my mental eye I today already know, how will look and as soon as the Slotplatte is applied it for you becomes intended also easier

Oh, that becomes a single track with a length of approx. 23m

 

[Frank T]

Hi Lars,

thank you and I know that it´s a nice Room

,
the house was build in 1903 and i searched for a flat like that for more than 2 years.

i´ll try to give you a spring stream

@all

I´ve just finished the underbody.
For a test times the timber bridge, the palace and the vineyard posed on their final place. And think it looks better as i tought.
Now i have to saw a lot at the Slotplate. Try some sawing today, "HELLO neighbours"

Here are more pics

Criticism desired

 

[Frank T]

Hi Boys,

I have just installed the first half of my circuit!
The entire village square receives a surface from a stonemade road surfacing, which i realise whith my Dremel. The village square is driven through per round 4times. " Entry to the box lane! (Gas station, has those stop re-designed is just like TF/MM) provided with a switch opening and in the rear part also still is in.

The track lenght is nearly 30m on round about 5squaremeter.

 

[Frank T]

Yes, the dremel is my and also your friend, i think

Today some more made. The background picture on the village side and the sidewalks.
With the background I must get still with color to around a uniform picture.
With the stonemade surfacing I already began and Duct cover at the roadside milled with my "Dremel"

,- I love this tool.

And here are the pics of my daily work

The round holes in the sidewalks are made for trees, which i want to "plant" in there

 

[Frank T]

You want closer pics?,-

here they are!

Each stone is approx. 3-4 x 2-3mm and the entry village square is nearly 0,5meter²

 

[Frank T]

Hi Umbra,

Do not do it to you! Those are approx. 20cm ² and I approximately needed 2 hours

Hope that i don´t have to buy too much drills.
for mySlot i bought 4 drills each for 15€.
and i thought that 2 are enough.

****e happens

 

[Frank T]

Today i fixed the second part.

Sorry , but today no big report, cause i´m a little bit sleepy. I used for this side nearly 5 Hours, because nothing works like i want to.

One of my cats stud behind me and i didn´t know it, so as i want to stay up, i fell over her and killed one slot. But that´s no problem i think.
But the many diffrent hights make it very natural.

i´m absolutly happy about that. The bridges and the rest of the slots i fix in the next few days, i hope.

@Per

i´ll make a new threat and try to explain the build of a house. But that in the next week. Have a lot of work with my profession this week.

Sorry about the quality of the images, these are made with my mobilfone

 

[Frank T]

Today i made a little more stonemade surfacing.

I´ve brushed it with a stheelbrush in my drill to get more structure.

 

[Frank T]

Hi r3ko,

I use these two forms, trapezoidally and cylindrically.

cylindrically for the long straight grooves,-
for the short transverse grooves stones make - trapezoidal

 

[Frank T]

Just fiixed the left Background ( photo on the Palais side has to be placed) the vinyard is in its final position. Next things to do, is installing the wires and the Lamps for few of my houses and for the marketplace. Streetlights will also follow .

So i have a lot of work for this weekend

, or tomorrow

on the rightside of the vinyard will a wooden bridge in a 50ties style be placed.

 

[Frank T]

Some more with the surface further made. Before the cathedral I made a small surface with marble slabs.
And also milled the first hole for a duct cover.

 

[Frank T]

Hi everybody,

today I began with a little landscape - a tree. Its developed from a piece of hedge. With something wire by right curved and then Irish Moos as underbody, Noch flocking above and that´s the result on the place were i will "plant" it.
The making took approx. 10 minutes

hope you like it

 

[Frank T]

Hello boys,

today i made a little decoration. Becomes a streetlight for the village square. 2 further 5 lighted lamps would be placed in front of my palace.
And still so approx. 5-6,1-2 ligthed lamps for the village square and still 8 one lighted lamps for the ramp to the palace.
Added 5 2ml one-way syringes as lampglass
1 hollow CFK staff
1 hollow plastic staff
1 art off plastic cover mother
some cupperwire 2mm
for the covers I still have 5 hole pottings,
5 wooden balls
and teething ochers
I already procured lamps and to have to be still soldered. and so it looks up to now.

 

[Frank T]

Hi at all,

i wanted to show you still briefly the finished lamp. The height is 15cm

I hope it please you as well as me

 

[Frank T]

And that´s the version with 2 lamps

 

[Frank T]

Maybe glaring Peter,

but only the ligths.

And here the last lamps for the village square
Tomorrow i ´ll finish the surfacing on the square.
And then i can begin with the colors on the sidewalks and the streets.

more images tomorrow i ´ll hope

 

[Frank T]

nearly
- 3km milled
- 8 drills
- 30 hr.
- some injuries of the drills on the hands -
1 well filled vacuum cleaner bag
and about 1 million stones later
i have the surfacing on the market place finally finished.

Now I can begin with the coloured organization of the place.
light-grey for the sidewalks
anthracite coal for the street surfacing
white-grey for the small marble surface before the church

Someone a better - other idea which the colors concerns?