SlotForum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
110 Posts
Ok I'm in the process of designing my permanant track see here for other post.

Ok now for the fun electronic bits

I would like all the electronics hidden out of sight, so for starters I would like to separate the PB screen and control buttons from the c7030, which will be already separated from the track, and place then else where.

Next up will be the pit pro I'm going to order.
What are the options to change or add to bigger LEDs or lights,
I would like to upgrade the pit pro to one that is about 1 - 2 foot tall.
I know it sounds crazy but there is method to my madness.
When I get a chance I'll try to knock something up in photoshop to give you an idea af what I'm thinking.
 

·
Prof I T
Ting Tong
Joined
·
11,085 Posts
hi
all sounds very do able,when you order your pitpro ask to have it sperated from the track at the same time.

I have just had mine done and made a custom acrylic stand for it to sit in.

The unit now has 2ft of cable seperating it from the track section
 

·
Registered
Joined
·
110 Posts
Discussion Starter · #3 ·
Thanks for the reply.
Separation frome the track is not a problem, problem arises when I want to make a 1-2 foot tall display.
 

·
Administrator
Joined
·
10,110 Posts
The array of LEDs are surface mount all on one big PCB, so not that easy to change. The ig red and green lights are on leads so a lot easier to extend or move.
 

·
Registered
Joined
·
110 Posts
Discussion Starter · #5 ·
QUOTE (RikoRocket @ 27 Nov 2011, 18:10) <{POST_SNAPBACK}>The array of LEDs are surface mount all on one big PCB, so not that easy to change. The ig red and green lights are on leads so a lot easier to extend or move.
Where's the fun if it was easy

Can these be removed and flying leads added in thier place?
If this is posible do we know what the output is for those serface LEDs, ie how big could I go.
 
1 - 5 of 5 Posts
Top