[Gabislot]

No he probado lo de los imanes todavía.
Pero mi problema fue que sin algún motivo no detectaba algunos pilotos o si los detectaba y en mitad de la carrera dejaba de detectarlos.
Y pclap acababa quedándose colgado y no respondía, sin poder terminar la carrera, a veces dejaba de contar vueltas, otras se quedaba repostando, otras no detectaba entrada en boxes.
Pero no era por tema de imanes, era porque parece que el dongle no funciona bien a veces en algún puerto otras si, una locura.
Y seguramente alguna actualización de Windows 10 habrá ocasionado el problema.
Continuo haciendo pruebas pero parece indicar que son los puertos USB, dongle y pclap a veces la comunicación no funciona bien, al menos creo que eso ha sido lo que me ha pasado.

 

[MALAFAMA]

and accelerated cars?
The dongle also hung up on us, failures in the pit line entry / exit, lap count etc ....

Guy gave us the solution to accelerations. configuring the ghost car in the file. (Not in PCLAP configuration)

 

[Gabislot]

A mí no me ha pasado lo de los coches acelerados.
Y tengo desactivado coches fantasmas en el archivo .ini
Es todo muy extraño sin tocar pclap, funcionando perfectamente, empezó a hacer las cosas que cuento.
Por lo tanto todo apunta a actualización de Windows 10.
Rsco2 y chrono iban bien.
Al bootloader a veces le costaba encontrar dispositivos.
Dos ordenadores diferentes Windows 10 actualizados, y ahora parece que un puerto USB si funciona bien, en los otros hace cosas raras.

 

[MALAFAMA]

Yes, yes, it is rare. We had stopped the system all year due to the pandemic... we didn't even know about the file. ini and when we started it happened to us about the accelerated cars. One day we were even talking without touching controls or anything and the cars that were on the track started to go by themselves.

We are now on Windows 10 pro version 21H1 (I think).

I just talked to a friend and he tells me that he has had problems with a headset plugged into the USB 3.0 ports. In the 2.0 he doesn't have that problem (current noise). They work at different voltages.

P.S. try to test the magnets if only to see if he does the same thing to us. I know it's weird but nothing of what has been said has happened to us again. This Friday we have a race, I hope the elves don't come hahaha

 

[Gysse]

The pit out magnet is unneccessary. Remove it, and the finish line magnet in the pitlan will server as pit out. Enable lap count on pit exit.

 

[MALAFAMA]

I don't remember exactly but I would say that we also tried it and sometimes it didn't recognize the entrance to the pit and it would tell you the lap and when it came out it would tell it again.

There have been so many tests that once it worked for us we don't touch anything else. We knew that sooner or later it would happen to more users and investigations would begin

 

[MALAFAMA]

Well yes, the elves came.

When we disputed the first race a colleague detected that he was missing laps. Soon another partner also and so several. The only change that was made before the race was to delay the finish line magnet that is on the individual straight (not the S/F one) because it was just before the exit to the track because when you stopped there, if you stopped to let another car that came thrown down the main straight you stayed standing on the magnet.

We stopped the race, we advanced the magnet again (move the track that has the magnet) and it did not fail in any more races (8 races in total).

Why is this happening? We do not know.

We hope that between PClap and slot.it they can detect the error and fix it.

 

[Jaiapa]

Hello. I have been doing tests and with a 3.10 dongle with the position of the magnets according to the manufacturer's instructions it works without problems. If I update the dongle to 3.12, the lap count errors start when I exit the pitbox.

 

[Atobit]

Hi,
You mean with the v3.10 on the dongle, no issue?

Because with the the latest dongle formware, PCLC is too not relialable in my side.

Can we downgrade to v3.10? Where to find the firmware?

Thanks!

 

[Henri]

Its in training mode with the fastest laptime on top and not the # of laps

I have this always..if wiggie doesnt help me..lol

 

[Jaiapa]

Hi,
You mean with the v3.10 on the dongle, no issue?

Because with the the latest dongle formware, PCLC is too not relialable in my side.

Can we downgrade to v3.10? Where to find the firmware?

Thanks!

Hello. For me it works without problems. I guess you will have to ask the manufacturer because on their website they only have the latest firmware.

 

[MrFlippant]

Can we downgrade to v3.10? Where to find the firmware?

If you're unable to locate a copy of the 3.10 dongle firmware, send me a PM and I can email it to you.

 

[Atobit]

Thanks Greg for the firmware!
I've been able to downgarde the firmware.
The Lap timing seems to be correct now, however, everytime a car de-slot, I soon i put back the car to the track, it had a lap to it.
I don't recall having this behavior before. Maybe a PCLC setting, but I can not find where it is.
Any help here?

 

[MrFlippant]

Does the same thing happen with Chrono and/or RCSO2?

 

[Atobit]

This behavior is just with PCLC, no problem with Chrono and RCSO2.
It had a lap when I put back the car on the track, but the lap timing is still running, so I think it's a software setting...somewhere.

 

[Slot.it]

So from 3,10 to 3.11/12 the resposnse from PClap seems slower ?

 

[MALAFAMA]

mistake

 

[MALAFAMA]

So from 3,10 to 3.11/12 the resposnse from PClap seems slower ?

It seems that way, although last Friday while I was training alone, there was a delay of about 7/8 meters

 

[GRUNZ]

Delay in what Malafama? Registering the lap?

 

[MALAFAMA]

Delay in what Malafama? Registering the lap?

Yes