SlotForum banner
21 - 28 of 28 Posts

·
Registered
Joined
·
2,493 Posts
Discussion Starter · #21 ·
Wrexham Slot Car Club's Ferrari Day

Two categories raced on the day

1 Ferrari GT No-Mags

Porsche Challenge rules (Just swap the word 'Porsche' for 'Ferrari'

2 Ferrari F1 one mag

Any out of the box Ferrari F1 car (PROPER reliveries are allowable)
Gluing and truing of tyres, bearings and motors is allowable.
Gearing may only be changed for pinions/crownwheels of the same number of teeth as standard equipment fitment for that car.
Body and chassis to remain as standard barring modification to allow 'body rock'
ONE magnet may be fitted to the car.
The magnet must be the original equipment fitment for that car, and may only be fitted in positions created for that purpose by the manufacturer.

thank you all.

Inte.
 

·
Registered
Joined
·
1,024 Posts
There are a lack of suitable Ferrari cars in my stable.

This event sounds like heaven for scratch building fans of which I am not one as you can tell.

Is anybody ever going to have a Lotus/Caterham 7 day and use stock cars with absolutely no setting up allowed (yes none at all and tyres must have tread) and with the standard magnets installed!

They provide the closest racing on 4 wheels. I have 4 of these if that helps?


Moped
 

·
Registered
Joined
·
318 Posts
With the postponment of the LGTC round on June 6th myself , Mooster and Lotus will now be able to attend Ferrari Day. Plenty of cars to choose from, just a matter of preparing the right ones.

See you there

Roly
 

·
Ric Woods
Joined
·
817 Posts
Lotus, you're welcome to hop aboard the Moomobile for the trip to Wrexham with 250 GTO and myself. Be prepared for a nice early start!

Mooster
 

·
Registered
Joined
·
2,493 Posts
Discussion Starter · #28 ·
SLOT-TECH
PRESENTS
THE "PRESTON" PORSCHE OPEN CHALLENGE

HERE IS YOUR CHANCE TO THROW THE RULES AND REGULATIONS OF NORMAL CLUB RACING OUT OF THE WINDOW, AND BUILD A SLOT CAR
USING ALL THE GOODIES THAT ARE NORMALLY BANNED!
RULES
YOUR CAR MUST BE A 1/32 SCALE PORSCHE WITH A PLASTIC CHASSIS, WINDOWS AND INTERIOR. (Including driver) NO TRACTION MAGNETS
ALL COMPONENTS USED TO BUILD YOUR PORSCHE MUST BE CURRENTLY AVAILABLE FROM ANY OF THE FOLLOWING MANUFACTURERS: - SCALEXTRIC, NINCO, (PROSLOT Europe), FLY, PINK-KAR, SCX, SLOT-IT, CARRERA, OZRACE, CARTRIX, (SCALEAUTO Motors only), CARTRONIC, REPROTEC, TEAMSLOT OR GOM.
IF THE PARTS YOU REQUIRE ARE NOT CURRENTLY MADE BY ANY OF THE LISTED MANUFACTURERS DON'T USE THEM!
CONSTRUCTION
THE BODY AND CHASSIS MAY BE MODIFIED TO ALLOW "BODY ROCK" AND THE FITTING OF MOTORS AND RUNNING GEAR. (Glue may be used)
BODIES CAN BE PAINTED.
MAXIMUM OVERALL WIDTH 65mm (Including wheels and tyres)
MINIMUM HEIGHT 32.5mm (No lowering of bodies)
RUBBER TYRES ONLY. (Free choice. No sponge, or goop!)
WEIGHT MAY BE ADDED INSIDE THE CAR. (Lead only)
 
21 - 28 of 28 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top