SlotForum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
20 Posts
i did around 85mm clearance for the low side and 115mm clearance for the high side as its a banked corner coming onto the straight overpass.

The low side's ramp was around 750mm long, but again, thats all curved. The high side of the banked curve was around 1500mm long, maybe longer, but I was aiming for 10 degrees camber all the way around.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top