SlotForum banner
1 - 1 of 1 Posts

· Premium Member
1,766 Posts
Good choice

I have two of these, but this one is my favourite:

I also had to use washers to eliminate rear axle play. In the picture below you can just see the two washers on the right hand side of the spur gear.

Fortunatley for me both of mine run smooth and consistant, but I'd check for rear axle play and for any tyre rub if you have problems. Also check that the motor spindle isn't rubbing on the tyre you can see in the photo above its pretty close. On one my Fly Ferrari 512's I had to chop the excess off the spindle and chamfer the pinion gear to stop it rubbing.

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.