SlotForum banner

Goodwood Circuit

135429 Views 271 Replies 79 Participants Last post by  gus3049
5
OK here we go. My Goodwood Track thread.
I have some of the sections started, most finished and some of the sections still to go. Mostly due to the fact the I am learning more and more about the Goodwood circuit and how its driven. I keep changing my mind but I'm nearly decided on the final shape. I've watched countless hours of in car footage of drivers negotiating the final couple of corners from Lavant through the Woodcote corner and down to the chicane and I find they drive these corners pretty much as one giant right hand turn so I just made it so you'll have to balance the car at speed in a giant slide. I started making the track corners exactly like the aerial photo of the track but found it was a bit too slot car-ish and the cars would pendulam on the guide maybe a bit too much. Also, as you can see from the following photos, the track is 4 lanes and this final section is one giant squeeze. This is mainly due to the fact that my boys grow and get faster and faster/ there'll be little chance to pull alongside and pass as I guess they'll just pound around this track pretty much on the limit. Although the squeeze section is just wide enough to fit past..just! So perhaps make the corners through here work best suited to the slot cars and get used to the fact that I wont win many races around here anymore. So here are the first couple of photos and I look forward to everyones comments..enjoy.

Lavant Straight



Woodcote



Chicane straight



Chicane



See less See more
1 - 2 of 272 Posts
Looks like a great project, certainly a thread to watch. Are you going to build a pit and paddock? That will be something else!
It's not very often you see such fast corners, and i think its excellent you stayed faithful to the real track instead of trying to squeeze some more lap length out of it. I'm very enveous, top job so far
See less See more
1 - 2 of 272 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top