SlotForum banner

Guides - deslotting - and whatever

3749 Views 30 Replies 17 Participants Last post by  AussieCapri
Scalextric have stated on their website why they have introduced the new guide:-

"A new guide blade system has been introduced to the range. The first car to have this fitted will be the TVR 400R due later this month.
Here's a 'guide' (excuse the pun) to some of the features:
1/ The blade can now turn further through the arc than the previous Scalextric guide blades.
2/ The guide plate can now be replaced without replacing the entire guide.
3/ The guide is hard-wired to the motor - no intermittent electrical contacts.
4/ The self-centering spring has been replaced with the traditional self centering effect of the guide blade wires.
5/ Cars will come with a pack of replaceable guide plates."

There is not mention of digital but there are a lot of good points listed including a bigger turn ard before it hits the stop and no intermittent electrical contacts.

AHA - no intermittent electrical contacts!!!

Interesting!!!

Cheers
Moped
1 - 1 of 31 Posts
3
QUOTE Lack of skill is losing that driver a lot of time

Well excuse me Astro, but I thought it was obvious that I wanted to demonstrate the spin recovery action in the video !!

As those who attended SF's party can attest, my real skill level is..........at times, marginally better


Ciao
Beppe
See less See more
1 - 1 of 31 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top