SlotForum banner

Harden Creek SG+ Neos

1383 Views 10 Replies 4 Participants Last post by  cryer-evo
I think I'm being a bit special as I cannot seem to work out how to fit my Harden Creek neos into my SG+ and then have a rear axle in the car.

Could someone who has fitted one of these take a photo so I could see how it is done!


1 - 1 of 11 Posts
Are they these ones?

They don't have a notch, so you'll need some narrow rear wheels to run them. The standard narrow BSRT hubs are a good choice, especially with the BSRT958 standard narrow rear tyres, which are pretty hard. Or cut some 'B' compound Supertires.

If you want to run full-width wheels and tyres, the Lucky Bob G3 neos have the necessary notch. Find them in his G3 magnet section.

See less See more
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.