I am sure you will get a better answer from someone else, but in the meantime....
- if you have one curved crossover track, you will effectively have only one lane so the question is irrelevent
- if you have 2 separate lanes (electrically... snip the wires on the CLCs as shown elsewhere in this forum) then you can run one or two cars ... if you only connect one controller and use one car you are racing only one car.... no problem. (Make sure you are in analogue mode, not digital for your analogue car.)
Hope that helps. You are lucky to get the 2 lane mod... I am looking at a switching arrangement between my C7030 and an analogue PB to allow me to do the same thing.
Cheers!
![]()
- if you have one curved crossover track, you will effectively have only one lane so the question is irrelevent
- if you have 2 separate lanes (electrically... snip the wires on the CLCs as shown elsewhere in this forum) then you can run one or two cars ... if you only connect one controller and use one car you are racing only one car.... no problem. (Make sure you are in analogue mode, not digital for your analogue car.)
Hope that helps. You are lucky to get the 2 lane mod... I am looking at a switching arrangement between my C7030 and an analogue PB to allow me to do the same thing.
Cheers!
