SlotForum banner

how do i design an equall lane length track

4620 Views 20 Replies 12 Participants Last post by  sealevel
hy, i,m going to route a track.[my ninco has so many lumps and bumps where the grandkids walk all over it]. the space is 16ft by 6ft 2 lane. i only have 2 criteria, it must have a long straight at the back with 2- 5ft6in outside radius bends on each end of the straight. the middle can be filled with anything as long as the lap lengths are roughly equall. could someone point me in the right direction. thanks. john
1 - 1 of 21 Posts
If overpasses (bridges) are an option, keep in mind that one or three or five of them will equalize lane lengths geometrically only, not necessarily lap-time-wise. And two or four (or any even number) of overpasses will not equalize lane lengths. Unequal lane lengths don't matter if you run round-robin races where each driver gets equal time in each lane.
1 - 1 of 21 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.