I would do the power mod on the APB and use a variable PSU. Then you shouldn't need to power the flippers separately but you have far more control at your fingertips with just the twist of a knob you can turn the power up or down to suit.
I would also recommend doing K31THs mod to liven the flippers so that cars don't get stuck if they stop on one.
And if your doing all this I would route the whole track including lane changers and use magnabraid.
You only want to do this once! If your going to produce a great track like this - do it well!
I would also recommend doing K31THs mod to liven the flippers so that cars don't get stuck if they stop on one.
And if your doing all this I would route the whole track including lane changers and use magnabraid.
You only want to do this once! If your going to produce a great track like this - do it well!
