SlotForum banner
1 - 3 of 3 Posts

·
Digital Guru
Joined
·
11,264 Posts
hi
this does look like it's going to be a superb track so i would not skimp on the power front.

I would not bother with the scaley psu's instead i would go for a fixed voltage one with a output of 15v and 15 amps as a minimum.

Then i would go for powering the flippers independently and daisy chain them up and run 2 wires from the psu to power them...

Last thing you want on a nice big club track is dips and surges for the sake of a few hours wiring and soldering..
 

·
Digital Guru
Joined
·
11,264 Posts
hi
as he is using ssdc opting for a variable voltage psu is a bit of a waste
as ssdc has the power options already installed.
 

·
Digital Guru
Joined
·
11,264 Posts
hi
hi compared to coppertape magnabraid will be expensive and also increase machining time.

If it's grip you are worried about try some eurethane tyres on a wood track,they are a lot more realistic than using magnets.
 
1 - 3 of 3 Posts
Top