SlotForum banner

I'm struggling to open car....

1181 Views 9 Replies 7 Participants Last post by  Mampara
I got me Scalectrix black Merc CLK DTM Ltd
. I will be running it solely on wood and need to add some weight. The problem now is that after I've removed the screws, I can only get the body about an inch away from the chassis
. The wiring to the lights seems to be too short. Do I have to remove the whole circuitry and replace it when I get the body back on or do I cut the wires
and fit longer ones? Any ideas.
See less See more
1 - 1 of 10 Posts
Mampara, just be careful and watch if your headlight lenses pop out as you ease it all apart.

This is one thread that I would like the new dude at Margate to read up and act upon! You're packing these cars tighter than "a snake's arse in a wagon rut" (source - Good Morning Vietnam)
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.