I'm struggling to open car....

1169 Views 9 Replies 7 Participants Last post by Mampara, Sep 21, 2004

Mampara

Discussion Starter · Sep 20, 2004

I got me Scalectrix black Merc CLK DTM Ltd

. I will be running it solely on wood and need to add some weight. The problem now is that after I've removed the screws, I can only get the body about an inch away from the chassis

. The wiring to the lights seems to be too short. Do I have to remove the whole circuitry and replace it when I get the body back on or do I cut the wires

and fit longer ones? Any ideas.

See less See more

Save

1 - 1 of 10 Posts

CoolScientist

· #5 · Sep 20, 2004

QUOTE (MK2-Escort @ 20 Sep 2004, 10:43)The corvette L88 and TVR 400R's are a right pain to open up

Yup - I bought 2 TVR 400R's yesterday, and on first opening, both were tough to get off. After a little investigation through the 5 mm, of clearance, I worked out, a little gentle force (and not just levering it with a screw driver

), they would come off a treat.

CoolS

See less See more

Save

1 - 1 of 10 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month