SlotForum banner
1 - 1 of 1 Posts

·
Greg Gaub
Joined
·
15,705 Posts
Try backing the screws on the panel behind the flipper a half turn or so. It could be on too tight.
If that doesn't help, open it up and look around for a broken wire, or if the little arm in the solenoid has come out of the black plastic bar that moves the flipper. That happens sometimes, and will make it so the flipper only goes one way.
Look for any other obstructions while you're in there. It should move freely in both directions.
 
1 - 1 of 1 Posts
Top