SlotForum banner
21 - 33 of 33 Posts

·
Greg Gaub
Joined
·
15,089 Posts
Better late than never?


QUOTE (Michael363672 @ 1 Jun 2010, 08:21) <{POST_SNAPBACK}>1. We want to add PC race control - So what is best to use ?

SSD Console: http://www.jackaments.demon.co.uk/SSDC/

QUOTE (Michael363672 @ 1 Jun 2010, 08:21) <{POST_SNAPBACK}>2. How do we make a cable so they can talk to each other ?

Tricky. I'd just save the time and trouble and order one pre-made from RichG.

QUOTE (Michael363672 @ 1 Jun 2010, 08:21) <{POST_SNAPBACK}>3. What would you paint the track with ?

Matte emulsion/latex house paint in some shade of gray that you like best.
 

·
Registered
Joined
·
2,036 Posts
Discussion Starter · #22 ·
QUOTE (MrFlippant @ 19 Jul 2010, 16:49) <{POST_SNAPBACK}>Better late than never?


SSD Console: http://www.jackaments.demon.co.uk/SSDC/

Tricky. I'd just save the time and trouble and order one pre-made from RichG.

Matte emulsion/latex house paint in some shade of gray that you like best.

And that is what we have done or should I say Lee has done the painting

Just need to run some tests before he moves it to the club

Thanks any way MR F


All I need to do now is make up some extension cables for the controllers anyone got a wiring diagram ?
 

·
Greg Gaub
Joined
·
15,089 Posts
No diagram needed. Just use a mono mini plug and sockets, and make sure you don't cross the wires between tip and sleeve.
You can use stereo mini plugs and sockets if you need to as well, since they just pass through the signal being used.
 

·
Administrator
Joined
·
10,133 Posts
Graeme, I hope you have a SH board fitted inside the PB to give you club level power. You are going to be gutted if you are just using stock, one guy brakes and all the other cars get an unwanted boost in power/speed...
 

·
Registered
Joined
·
2,036 Posts
Discussion Starter · #27 ·
Hi

Last week Myself and Lee ran a race just the 2 of us but with 10 cars on track


All we did was double up the ID on some pace cars and run it one time that way the extra counts on some ID's didnt matter

It was good fun and there is just enough room to the side of the track for crashed pace cars to be pushed out of the way
and aswe were using NASCars they were basically bullit proof.

Keep tuned for some big developments comming soon ..................

Michael
 

·
Registered
Joined
·
28 Posts
QUOTE (Michael363672 @ 26 May 2010, 22:58) <{POST_SNAPBACK}>Just so you know this was not built by me
Lee one of our members built it

Michael363672 / Lee T,
would you have any images of and a list of the tools required for the braiding of the track?
i for one would be interested in the information.
cheers in advance,
Gary 'CRASH' D
 

·
Registered
Joined
·
2,036 Posts
Discussion Starter · #33 ·
But you did a fabulous job on it Lee


And now with the start lights etc this is what you are missing now folks


So why not pop down next Thursday 20th October racing starts at 7.30pm

Michael
 
21 - 33 of 33 Posts
Top