SlotForum banner
1 - 1 of 1 Posts

· Rich Dumas
Joined
·
4,536 Posts
That is not a can motor, it is a regular M chassis with the ceramic magnets and flux collector removed. There are flat neo motor magnets supplemented with small square neo magnets for more traction. The magnets appear to be held in place with hot glue or blobs of epoxy. If the magnets were too strong the chassis would bend, it was not intended for a lot of downforce. The motor might tend to heat up as well.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top