SlotForum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
270 Posts
Discussion Starter · #1 ·
Absolutely no experience of SSD so apologies if this is a dumb question.

- Is it possible to lock the flippers in an SSD pit entry/exit in either direction?

- If so how easy is it to swap directions? I don't need to do it often so manual swapping is O.K.

Thanks for any help.
 

·
Registered
Joined
·
270 Posts
Discussion Starter · #5 ·
QUOTE (StuBeeDoo @ 26 Jul 2011, 20:02) <{POST_SNAPBACK}>Reads like you could be thinking along similar lines to me. Short track/long track, similar idea to Brands Hatch????

I asked a similar question here a while ago, and got the following reply........

You've got it - long flowing track with twisty rally loop. I want to be able to run a long open track but occasionally add a rally style extension with tight turns, elevation and surface changes. The long track stays down full time and the rally track gets laid out whenever. I suppose I could just break into the main track but the SSD pit entry/exit pieces seem to offer a more elegant solution.

I had thought of wiring up the flipper mechanism to a simple supply and just use a normally open/closed arrangement for loop or no loop. Are the actuators simple solenoids and what voltage do they work at?

MrFlippant's idea of tape seems like a good starting point though, might give that a try before I get too carried away.

Thanks for the answers so far.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top