SlotForum banner

Micro Scalextric LMP Cars

2832 Views 24 Replies 9 Participants Last post by  AndySlots
Are the Micro Scalextric LMP cars based on a real LMP car and if so what is it, I'm just looking at options for the Pinewood 6 hour next year as I don't really fancy buying an expensive AFX body just to repaint it.
21 - 25 of 25 Posts
QUOTE (slowracer @ 29 Nov 2011, 15:02) <{POST_SNAPBACK}>Its not like the good old days, when you had 3/4 LMP bodies (more if you include the lighted ones) to choose from and 2-4 liveries too!

Egg Zach R Lee
QUOTE (montoya1 @ 29 Nov 2011, 15:05) <{POST_SNAPBACK}>LMPs? Do you mean group Cs?

There the ones
See less See more
Same thing with those really, best body by far was the Jag, which came in two colour schemes as standard.
As this is post has a focus on the 6hr i thought i would try and clarify some points.

The rules for the 2012 race for body width is a follows:

Bodies should fall within the 34mm rule, butexceptions will be provided where the original design of the body exceeded thisrule. No body shall exceed a width of 34.5mm.

This rule remains unchanged from previous years and was driven from the AFX GT40 being wider than the 34mm rule. Rather than exclude the body, the ruling was changed. The AFX Pugs and Audis come in at under 34mm, but other bodies from other manufacturers may be wider. Any resin bodies are expected to meet the 34mm rule.

andy
21 - 25 of 25 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top