SlotForum banner

N-Digital and analog on same circuit

1994 Views 8 Replies 6 Participants Last post by  mustang
I know that for using N-Digital and analog on the same track I have to change the track part with Digital Console with normal Analog connection track. But is it possible to leave lane changers in the track and use them as normal analog straight track? Do they have connection between both lanes or not?
1 - 1 of 9 Posts
Hi FP,

you can leave the lane changers in, but you will have to remove the connections between both lanes.

Just turn the LC around, open the screws and remove the back side and you will see.

1 - 1 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.