SlotForum banner

N-Digital and analog on same circuit

1997 Views 8 Replies 6 Participants Last post by  mustang
I know that for using N-Digital and analog on the same track I have to change the track part with Digital Console with normal Analog connection track. But is it possible to leave lane changers in the track and use them as normal analog straight track? Do they have connection between both lanes or not?
1 - 1 of 9 Posts
Here are two threads that cover this subject thoroughly:;#entry229977;hl=analog+cut

I would add:

- Read all posts because there are revisions to the process in later posts,

- Rather than cutting wires, I would desolder them so that stock condition can be restored.

See less See more
1 - 1 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.