SlotForum banner
1 - 6 of 6 Posts

·
Vendor
Joined
·
2,940 Posts
Discussion Starter · #1 ·
Hi.
I'm back from a longish trip and will reply to the other forum threads soon. In the meanwhile, we've uploaded a new software version of the oXigen RMS software Chrono 0.0.36

http://www.slot.it/INGLESE/Oxigen_Software.html

It is exactly the same as 0.034, but it has been recompiled to work on both Intel and AMD processors, whereas 0.034 had troubles with AMDs. Both 0.034 and 0.036 have much better support for Windows 7. No please, don't ask about Windows 8 yet


If you run oXigen with 0.034 and have no problems then there is no need to switch to 0.036. However, version 0.034 has been made inaccessible as 0.036 supersedes it.

Cutting and pasting from the 0.34 release thread:

---------------
A lot of work has been put into this release. Compared to 0.32, there are no new features, but we've concentrated in fixing the issues that as far as we can tell were quite annoying for a few users.
In particular, now the software can be used by any user on the PC, not only Admin, and a few problems with positioning of files in directories have been addressed. Install however must be made by a user with admin provileges (not necessarily the 'admin' user)

You can download it from
http://www.slot.it/INGLESE/Oxigen_Software.html

Instructions:
0 - make sure you are a user with 'admin' privileges. Not necessarily THE 'admin' user like before.
1 - Uninstall the previous version and remove directory C:/user/Documents/Slotit_O2_chrono and all its contents
2 - Download the file from our website: http://www.slot.it/INGLESE/Oxigen_Software.html
3 - extract the 'Volume' directory from the zip archive, and launch setup
4 - the installer places the application software inside C:/Programs/Slotit_O2_chrono, and places in directory C:/user/Documents/.. the directories containing the USB driver and audio files used by the Chrono sw.
5 - With XP and Win7: Like I said, any user with admin powers, but not necessarily the 'admin' user, can install and use this software, which can be run, after install, directly by the user which performed the install procedure. In other words: install it and run it.
6 - If you want to enable ANY users to run the software it is necessary for the user with admin privileges to copy the directory C:/Users/<your admin user name>/Documents/Slotit_O2_chrono/SupportFiles/SettingFiles/Audio in C:/users/<name_of_the_non_admin_ user>/Documents/Slotit_O2_chrono/SupportFiles/SettingFiles/Audio, or a message error will pop up, informing you that the sound files cannot be found. All other files are created automatically.
7 - Got Vista? Try Chrono anyway, if it doesn't work, then you probably have bigger problems with VISTA anyway


Please report any bugs you may come across.
Regards
Maurizio
 

·
Registered
Joined
·
1,166 Posts
Would it be possible to add a soft "ding" that can turned on/off for when cars cross the S/F line, very much like the way its done in RC car racing?
it would be very useful to detect if a car is not counting laps during a race.
 

·
Vendor
Joined
·
2,940 Posts
Discussion Starter · #5 ·
Yes, it can be done and we will make it in the future.
For now, the RMS plays an alarm sound each time a controller is reset or each time lap times are below or above the minimum/maximum accepted lap time.
You can try setting the minimum lap time to a silly long time, it may work for you.

Regards
Maurizio
 
1 - 6 of 6 Posts
Top