SlotForum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
3,558 Posts
Discussion Starter · #1 ·
the,ve got a new class for neo drag motors its usually a hawk 6 with a veociraptor arm[about 29t of 27g wire, i think thats right] the motors cost £40 to £55 depending on spec. its hardbody and the top cars are tuning times in the .670 range, check the motors out at parts express. john.
 

·
Premium Member
Joined
·
639 Posts
Hi Stoner, I've bought myself a couple of Neo motors, will be putting them in my cars over the holiday period. I'll let you know how they get on.

Cheers

Steve D
 

·
Registered
Joined
·
3,558 Posts
Discussion Starter · #3 ·
hy steve d, let me know how they perfom. ive got a standard hawk7 58000 and ive just received 2 standard neo hawk 6s the 7-6 are going in 1/32 cars and the other 6 is going in a 1/24, all circuit cars. i have built a modern fiat f/a with a super 16d and oulaw arm, but no way to test it down here in cornwall. happy christmass. john.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top