[stoner]

ive just got a ninco 35ohms controller and ive wired it up to standard parma colours. its 4 wires out of the controller all soldered to a circuit- wiper board. can you tell me if i,ve done it right. the black and red wires go together and go to the full speed end of the resistor= parma white. the yellow wire goes to brake post-start of the resistor=parma red. and green wire goes to trigger-resistor wiper=parma black. john

 

[stoner]

no electronic experts out there, ah well looks like i,ve got to blow something up, or not, i,ll see john

 

[Abarth Mike]

I can't help specifically as I don't have a Ninco controller and can't find a picture. If you post one I can.

 

[stoner]

i haven,t got a clue mike how to post a picture. i wouldn,t be able to do it if you explained. i thought i described it pretty well. john

 

[beardy56]

check out this post it should give you all the info you need

 

[stoner]

thanks beardy, thats the diagrams i used to wire my track, +polarity with reversing switches and a voltage controller. the ninco did work the way i had it. i,ve just soldered in some heavier wire in parma colours. john

 

[xonox]

Are you talking about the new Ninco controllers with the different connector ?

 

[stoner]

yep thats the one. 4 tiny wires out of the controller into a little square plug. john