SlotForum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hello,

I would just like to say this a great forum with lots of great information,

I am getting a start in this hobby and I have a question regarding Ninco terminal (connection) track.

I purchased some track from Ebay and I ended up with two pieces of single terminal (connection) track. Does anybody know if they can be rewired so that each track provides power to a single lane only?

I would like to like to utilize both pieces in this manner if possible, as from all of the reading I have done before getting into this hobby indicates that providing power separately for each lane is a good idea.

Thank you.
 

·
Registered
Joined
·
114 Posts
Hi Cmstastny,

Of course you can rewire the standard Ninco power track. In fact it is quite easy: just cut the wires of one lane on each power track. To do this you have to unscrew the power conections lower part (as i can remember 5 or 7 screws on each power track) and then you can see the red and grey (?) wires to each lane.

Regards
Zubi
 
1 - 2 of 2 Posts
Top