Joined
·
1,967 Posts
Just catching up... You can't change the support RC has built in for rgb leds. It's there as an out of the box solution. You either like it or you don't. You can configure what color you want a lane color to show up as because often times what's on a computer screen looks very different than what an LED looks like, but fuel does not use lane color at all so you can't change it.
You also can't change the 0-9 or 9-0 way it displays fuel. As suggested you have to orient the leds the way you want it to look...
As mentioned, you can code in the sketch whatever you like. What's displayed above is a snippet from the latest beta's sketch in which fuel stuttering was implemented. You could hook into that same code (I believe the value is 0-100 as a percentage, but I'd have to double check). Armed with that you could control your leds yourself, but the code could be a challenge for a non-programmer and I don't have the time to help, but what you're asking is 100% doable in the sketch.
You also can't change the 0-9 or 9-0 way it displays fuel. As suggested you have to orient the leds the way you want it to look...
As mentioned, you can code in the sketch whatever you like. What's displayed above is a snippet from the latest beta's sketch in which fuel stuttering was implemented. You could hook into that same code (I believe the value is 0-100 as a percentage, but I'd have to double check). Armed with that you could control your leds yourself, but the code could be a challenge for a non-programmer and I don't have the time to help, but what you're asking is 100% doable in the sketch.
