SlotForum banner

pit lane reversal

1090 Views 9 Replies 7 Participants Last post by  Riddell Racer
I need to change my pit lane from left to right on my track, can I reverse the wires / bits , and how .
1 - 1 of 10 Posts
looking from the top the sections do look like they have a senser fitted,but a closer look from underneath reveals this is not the case.

Very early pit in and out sections did have a moving flipper on both sections making reversal very easy but the later ones have the exit one as fixed flipper.

As the mouldings are universal the pit exit for one type becomes the pit entrance for another and the pockets for the various parts are already there,but if unused just have blanking plates in place...

At the current prices for these sections it's best to double check to make sure you have the correct one ordered...
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.