Slot Cars Forum banner

1 - 3 of 3 Posts

·
Prof I T
Ting Tong
Joined
·
11,085 Posts
Hi
Having recently purchased a 4 car pb for id'ing cars only I was trying to find a psu for a reasonable price.

Most were silly money or came with no power lead'so I decided to utilise the spring gates on the 30amp psu wich also powers the C7042app.

Very easy to do,remove 4 screws and solder direct to the pcb. Powered up and all good. Cost was about half hour of time and some spare wire out the parts bin.
 

·
Prof I T
Ting Tong
Joined
·
11,085 Posts
Discussion Starter · #3 ·
hi
yes used the power lead from the apb and a multimeter to identify the +and the - and soldered onto the points where the dc jacks are on the pcb.

Ill take a pic of the inside later,but it is a easy mod to do,with a 25w iron anyway.
 
1 - 3 of 3 Posts
Top