SlotForum banner
1 - 1 of 1 Posts

· Andrew Wallace
Joined
·
1,102 Posts
If you want to run analog, then treat it like analog. Take a feed from the track piece near the powerbase - you will end up with 4 cables. This is +ve and -ve for both lane 1 and lane 2. Now you need to connect these to leads coming from the same lanes and polarity from around the track. As long as you make all the other changes (i.e. set flippers and mod CLC and XLC) then you can run both analog and digital with the power taps still connected.
If you connect all the +ve rails and all the -ve rails, it will work in digital, but you won't be able to run analog.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top