SlotForum banner

Problems with Avant Slot cars on Scalextric Digital in Analog mode

1643 Views 6 Replies 3 Participants Last post by  mINdAt3z
Hi,

Santa brought me a nice christmas present, a set of Avant Slot cars, the 2008 Le Mans winners set with 3 cars. I love the design and the cars seem interesting with lots of abilities right out of the box for adjusting, but as soon as I put them on the track, I experience some problems. I run a Scalextric digital track with the advanced powerbase and to run these cars I put the track in Analog mode.

The problem is that the cars keep "jumping", as if they lack and gain electricity. If i put two cars on the same track, they stop jumping and run a bit smoother, tho I dont "feel" them as smooth as for instance my Slot It cars or my NSR cars.

What can be causing the "jumping" behaviour? Are they for some reason not liking the digital track in analog mode? Or is it a volt/amp problem? I think the advanced powerbase on the Scalextric produces 15v? Or can it be something more simple like old braiding or...?

I have 20+ cars something, and these are the only ones that behave like this and I am of course curious to find out why and solve it. Any suggestions or help would be much appreiciated.

// Micke
1 - 1 of 7 Posts
Im not to sure about the digital side of things but the avants will have motors rated 25k to 27k. The NSR's will be 22k so maybe the avants are pulling to much power for your track.

I have several avant rally cars & I swapped the motors on all of them for Ninco NC5 as they are to power full for me.

Cheers

Paul.
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top