SlotForum banner
1 - 2 of 2 Posts

· Registered
Joined
·
43 Posts
Discussion Starter · #1 ·
Hi!

Last night in our club we have an interesting discussion about the ProSlot EVO motors, in particular about EVO 1.

This motor run in the class of NInco NC-1, Cartrix TX-1 and a few more. The cars that usually wins the race are Alfa Romeo 156, from ProSlot with NC-1 fited. Now some folks appear with Scalextric/SuperSlot Mercedes with EVO 1 and the cars are very good, fast and with good braking.



In the Scalextric motors the pinion is at endbell side and the motors EVO1 I know (ProSlot Ref. PS3000) the pinion is at can side. I asked the folks about this and they told me some EVO motors have a double shaft like the motors from Slot.It. Any body have an EVO motor of this type with double shaft? If so what is the ProSlot reference?

Thank you for your help.
 

· Registered
Joined
·
43 Posts
Discussion Starter · #13 ·
QUOTE There are Evo motors with the shaft which protrudes from both ends, however unlike the slot.it motors the shaft isn't long enough to fit directly into a Scalextric chassis.

Thank you Sean. Can you post a photo of one of these motors? If possible fited in a Scalextric chassis.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top