SlotForum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
96 Posts
Discussion Starter · #1 ·
Hi all!

We've discussed in a previous thread the sometimes very poor build quality of the ProSlot Toyotas and I got one of the bad ones. It is now heavily modified with Slot.it gearing and new aluminum wheels etc. The magnet was rusty and it actually broke while I was working with the car.

Does anyone have some good ideas on what type of magnet i should buy and where to place it in the car.....and yes sorry I run with magnets


Just got a ProSlot Ferrari 360 and it runs very well...

Morten
 

·
Registered
Joined
·
2,378 Posts
Hi Mort, I re-magneted my GT1 with a Fly bar on it's side just in front of the rubber front pod mount and a radio shack minibutton on the bottom just behind the pod. I also think I put a rectangular tweaker inside the chassis just above the mini button. The layout of this car makes magnet placement tricky. I think that another fly bar in place of the tweaker inside and no mini button would also work. Mine is pretty close to my Slot It Audi with the stock magnet now. Good Luck.
 
1 - 2 of 2 Posts
Top