SlotForum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
106 Posts
So in the end even I has loaded down this system to give it a try.
Completely new to digital racing I am learning it step by step.
I have a Ninco track converted to Slotit Oxigen with Stotit controllers.
I have read the manual and it is very much to take in, and maybe I have missed something.

I have one question. When a car deslots and you have a trackcall.
Is the only way to get - track is clear - to go via the laptop and clear it or is it possible to get
- track is clear - via the controller in some way?
I hope you understand what I mean.
 

·
Registered
Joined
·
106 Posts
I haven't used RCS02 enough to know this off the top of my head without testing, however with RCS64 you can clear the Track Call by each driver pressing their Brake button signalling they are ready or using the PC keyboard to clear it all at once. Hope this assists.
So far I have only tested it myself and I have tried everything with the controller but nothing
clears the track. I have to go to the laptop and clear the track
 

·
Registered
Joined
·
106 Posts
Hi, you can clear the trackcall from the controller by either pressing lc up and down simultaneously or round brake button depending on manual call setting.
Thankyou for helping. Just tried this and when pressing simultaneosly on lc up and down it worked.
I allso noted that it was enough with one controller to clear. (The one that desloted)
I never got it to work with brake button. What setting should be used to make it work with
brake button?
 

·
Registered
Joined
·
106 Posts
Now I have tried the BRAKE setting, but it didnt change anything.
To clear track call I still have to push both LC buttons simultaneosly.
If I push brake button the car brakes.

I noticed something on the keyboard when I changed from XLC to BRAKE setting.
XLC was marked with a blue dot. That blue dot disapeared when changing to BRAKE.

All in all I am very happy with the RCS o2 and you have done a fantastic job to create this system.

I can live with pressing two buttons instead of one
 

·
Registered
Joined
·
106 Posts
I Will check this today. As I mentioned before. Completely new to digital racing and
learning step by step. Allso I am not an expert on computers but I feel this so very
fashinating that I want to learn it. :)
 
1 - 5 of 5 Posts
Top